Celestica – DFT and ICT Development Support Engineering Lead – Newmarket, ON

Company: Celestica

Location: Newmarket, ON

Expected salary:

Job date: Wed, 15 Jan 2025 07:10:32 GMT

Job description: ​Req ID: 124563
Remote Position: Hybrid
Region: Americas
Country: Canada
State/Province: Ontario
City: NewmarketSummaryIncumbents are fully qualified to execute job/role accountabilities working independently on most aspects of the job. Work is performed within established professional standards and practices. Tasks are moderately complex in nature where judgment is required to complete recurring assignments independently and to determine the best methods to follow to complete assignments. Erroneous decisions or failure to achieve results may have a negative impact on the division’s/department’s operations, schedules, and/or performance goals. Works under general Supervision. Situations not covered by standard processes, procedures and methods are referred to manager or expert resource. May demonstrate work methods to new employees. Builds internal and external relationships, with emphasis on those that facilitate the achievement of job/role accountabilities, such as relationships with key suppliers, customers and internal service and teams.Detailed DescriptionActivities include (but are not limited to) the following:

  • Develops and executes structural test strategy for new products including design for manufacture and test analysis and feedback.
  • Project leadership, including management of (and communication with) team members, suppliers and customers both internal & external.
  • Manage multiple projects and keeping track of schedules and deliverables
  • Collaborate with a highly experienced engineering and manufacturing team(s) to review and provide input on structural test strategies.
  • Design-for-Test (DFT) proposal (quote) generation for Internal and External customers
  • Perform DFT Analysis including, but not limited to the following:
  • Manual Schematics Review
  • Component Datasheets Research
  • Automated Physical test points accessibility analysis and optimization
  • Manual and Automated Component Level Coverage Prediction
  • DFT Report Creation for Internal and External Customers
  • ICT Turnkey Test Development Proposal (Quote) Generation for internal and External customers based on customer given requirements and/or Celestica standard requirements
  • Collaboration experience with US, Asian, EU based ICT suppliers and fixture vendors
  • Maintenance and continuous improvements in ICT Test development, debug, validation, qualification, onsite installation, production release and transfer processes
  • Manage external turnkey ICT development and fixture suppliers and verifying their outputs and deliverables against customer requirements and schedule demands
  • Involvement in all areas of the ICT test development process, including procurement, fixture vendor management, ICT verification & debug, ICT qualification and installation support for manufacturing.
  • Implements production systems to ensure maximum utilization of critical resources, maximum throughput, minimum cost and capacity growth.
  • Integrate ICT tools and code developed by other internal groups or external customers.
  • Collaboration with manufacturing test teams & external ICT suppliers on debug of challenging solutions using design of experiments, tools, and failure analysis methodologies.
  • Apply a continuous improvement mindset to all aspects of the ICT development and DFT processes.
  • Some Travelling requirements to overseas (US, Mexico, Asia, EU)

Knowledge/Skills/Competencies

  • Engineering Foundation Competencies
  • Knowledge and understanding of the design process for systems and printed circuit boards
  • Knowledge and understanding of systems and printed circuit board manufacturing processes and equipment
  • Knowledge of industry and quality standards
  • Ability to evaluate, diagnose and troubleshoot problems at component and pin level
  • Knowledge of materials and components used in the construction of systems and printed circuit boards and subassemblies
  • Knowledge of industry and quality standards for incoming materials
  • Ability to evaluate materials, gather and analyze data and determine root cause of problems
  • Knowledge of testing software, processes and methodologies and failure analysis
  • Minimum 5 years of Physical DFT analysis experience using TestExpert, Valor Process Prep, or equivalent software tool
  • Minimum 3 years of Automated DFT analysis experience using TestWay or TestWay Express or equivalent tool
  • Minimum 5 years of Incircuit Test (ICT) development experience on Keysight 3070 platform
  • Experience executing ICT test and fixture debug and bring-up for new PCBAs
  • Experience maintaining test fixtures and specialized tools for mfg test automation
  • ICT fixture strain analysis experience
  • Experience working with various ICT fixture technologies (Dual-Stage, Dual-Well, Vacuum & Pneumatics Driven, 39mil Probes, X-Probe, Wireless)
  • Experience working with panelized PCBA testing at ICT
  • Some experience in 3rd party hardware & software integration into ICT fixtures & programs, such us device programmers, relays, auto barcode scanners, LED light sensors, CLK Dividers, static loads, Vortex Air Cooling preferred
  • Some simple functional test experience with integration of external instrumentation such as PSUs, Load boxes, DMMs, scopes etc. Into ICT solution preferred
  • ICT Supplier management skills
  • Strong operations background (electronics manufacturing experience preferred)
  • Ability to effectively communicate with a variety of internal and external customers
  • ICT Test Development experience on Teradyne GR228x platform would be an asset
  • Test development experience on any MDA platform would be an asset
  • Standalone Boundary Scan test development experience on any well-known platforms (Corelis, Asset InterTech, Goepel, Keysight etc.) would be an asset
  • Instrumentation automation, driver development (preferred, not mandatory)
  • Development in Aerospace & Defense and/or Healthcare industry would be an asset (not mandatory)
  • Development in Hyperscale, Cloud Connectivity and/or DataCenter industry would be an asset (not mandatory)
  • Some development experience with National Instruments LabView would be an asset (not mandatory)
  • Some National Instruments TestStand experience would be an asset (not mandatory)
  • Some board design and layout experience would be an asset (not mandatory)
  • Some Hardware development such as connector loopback interposers design for ICT fixture, integration and qualification (preferred, not mandatory)

Physical Demands

  • Duties of this position are varied and will include:
  • Lab work including assembling test equipment, racks of instruments, running cables, wiring and pcb assembly
  • Normal office environment with exposure to manufacturing environments
  • May require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data
  • Repetitive manual movements are frequently required (e.g. data entry, using a computer mouse, using a calculator, etc)

Typical Experience

  • Minimum 5 years relevant experience.

Typical Education

  • Bachelor of Applied Science or Engineering in Computer or Electrical or Mechatronics
  • Educational Requirements may vary by Geography

NotesThis job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Accommodations are available upon request for candidates throughout the hiring process. If you require an accommodation, we will work with you to meet your needs.This position involves technologies regulated by the Canadian government’s Controlled Goods Program (CGP). Candidates must be Canadian citizens or permanent residents of Canada and meet all other requirements under CGP. Job offers will be conditional upon candidates undergoing a successful security screening per the Controlled Goods Regulations.COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.Celestica would like to thank all applicants, however, only qualified applicants will be contacted.Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Advanced Micro Devices, Inc – SoC DFT Engineer – Vancouver, BC

Company: Advanced Micro Devices, Inc

Location: Vancouver, BC

Job description: complex AMD products. THE PERSON: You will have the opportunity to be involved in all stages of the project execution… Verification Manager and will have the following responsibilities: Develop RTL and integrate internal/external RTL logic into SoC…
The content describes a job opportunity for a person to work on complex AMD products. The individual will be involved in all stages of project execution and will be responsible for developing RTL and integrating internal and external RTL logic into SoC as a Verification Manager.
Job Description

In this position, you will be responsible for providing support and assistance to senior management in a fast-paced and dynamic work environment. Your main duties will include managing calendars, scheduling meetings, coordinating travel arrangements, and preparing reports and presentations. You will also be responsible for liaising with internal and external stakeholders, handling confidential information, and ensuring the smooth running of the office. The successful candidate will have excellent communication and organizational skills, attention to detail, and the ability to work independently and as part of a team.

Expected salary:

Job date: Fri, 19 Jul 2024 22:12:08 GMT

Advanced Micro Devices – SoC DFT Engineer – Vancouver, BC

Company: Advanced Micro Devices

Location: Vancouver, BC

Job description: products. THE PERSON: You will have the opportunity to be involved in all stages of the project execution from high level… RESPONSIBILITIES: The successful candidate will report to the SOC DFT (Design-For-Test) Integration & Design Verification Manager…
The person will have the chance to be involved in all project stages, from high level concept to execution. They will report to the SOC DFT Integration & Design Verification Manager and be responsible for carrying out various tasks related to design and testing.
Job Description:

We are looking for a qualified and experienced Retail Sales Associate to join our team. The successful candidate will be responsible for providing outstanding customer service, generating sales, merchandising, and maintaining the overall appearance and cleanliness of the store. The Retail Sales Associate will also be responsible for processing transactions, stocking shelves, and assisting customers with any inquiries or issues they may have.

Key Responsibilities:

– Greet and assist customers in a friendly and professional manner
– Achieve sales targets and goals set by management
– Maintain a clean and organized sales floor
– Assist with inventory management and restocking
– Process transactions accurately and efficiently
– Handle customer inquiries and issues in a timely and professional manner
– Ensure merchandise is displayed attractively and in accordance with company standards
– Perform opening and closing duties as required
– Adhere to all company policies and procedures
– Work collaboratively with team members to achieve sales and customer service goals

Qualifications:

– High school diploma or equivalent
– Previous retail sales experience is preferred
– Strong communication and customer service skills
– Ability to work in a fast-paced environment
– Detail-oriented and organized
– Ability to stand for extended periods and lift up to 25 pounds
– Availability to work evenings, weekends, and holidays as needed

If you meet the above qualifications and are looking to join a dynamic team, please submit your resume and cover letter for consideration. We look forward to hearing from you!

Expected salary:

Job date: Tue, 09 Apr 2024 04:27:44 GMT